site
Print-friendly version |
Home Page > Amys Choices > Fetish Products > Cock and Ball Toys > Chastity Cages > 5620 CB 2000 Chastity Cage
 You are not logged in. Click here to log in.
5620 CB 2000 Chastity Cage
Price: £130.65
Description
The CB-2000 is an innovative design for todays active man. The material being used is a highly durable plastic made of Polycarbonate. The strength of this material exceeds that of acrylic and many other plastic blends. It is transparent in color.

The CB-2000 consists of 2 parts:

Ring 'A': Is a round design eliminating any pinching or chaffing while being worn. There is a center recessed hole that accepts the locking pin. There are two side holes that accept the guide pins from the 'B'ring. The guide pins are designed to take the torque when one becomes erect. The 'A' ring comes in five different sizes: 1 1/2" I.D., 1 5/8" I.D., 1 3/4" I.D., 1 7/8" I.D. and 2.0" I.D. The five 'A' rings are included with each order. This helps to eliminate the need to find an exact size.

Ring 'B': Again, is a round design. The 'B' ring has 2 guide pins that feed into the 'A' ring. The locking pin feeds from the 'A' ring through the 'B' ring and accepts either a small brass padlock or plastic lock for security.

Rings 'C' and 'D': These two rings are connected by way of bars that connect to the 'B' ring. Rings 'B', 'C' and 'D' make up one complete unit. This cage portion encases the penis and attaches to the 'A' ring.

Ring 'D': Two small bars go across the bottom of Ring 'D'. This prevents manual stimulation while still allowing use at the urinals.

Top Outside Length of Cage Portion is 4 1/8" Weight...CB-2000 weights less than 2 1/2 ounces completely assembled with the plastic lock. Various sized spacers are provided for the purpose of security and comfort according to the inidividual need.

Locks:

Brass Padlock: A durable brass padlock with 3 keys is provided with each order.

Plastic Locks: Each order receives 5 plastic locks. Each lock is individually numbered to assure tamper proof. Once the plastic locks have been engaged the only method of removal is to cut the lock itself, they cannot be re-attached or glued back in place.

INSTRUCTIONS—CB-2000

Lubricate the head and top shaft of penis with gel or lotion.

Ring-A: Pull a little skin from the ball sack through the ring. Push one of the testicles through the ring. Take a little more skin and push the other testicle through. Push the penis down through the ring.

Locking Pin: Insert the locking pin from behind the A-Ring. Make sure you insert it through the recessed side.

Ring-B: Feed the penis through Ring-B. Push the penis down in order to avoid pinching when inserting guide pins for connection of Ring-A and Ring-B.

Spacers: Spacers are provided for proper fitting. Spacers go between Ring-A and Ring-B on the locking pin. This insures security and comfort and avoids pinching. The small spacer goes behind the lock and in front of Ring-B.

Guide Pins: Connect Ring-A and Ring-B by way of the guide pins. After finding the proper spacing you may need to cut down the guide pins. If necessary, simply use a pair of side cutter pliers and then smooth the edges with an emery board.

Locks: Attach the brass lock through the hole at the end of the locking pin. Plastic locks are provided to pass through metal detectors.

Cleaning: Use a mild soap and soft type brush (toothbrush). Do Not Use Household Cleaning Products.

NOTE: After showering, apply lotion to head of penis and spread with cotton swab. This allows the penis to easily slide back down into the cage portion.
Copyright © Amys Attic UK Ltd 2009 Web design by 7Soft.co.uk